Daily Bulletin

Business Mentor

.

  • Written by C Raina MacIntyre, Professor of Global Biosecurity, NHMRC Principal Research Fellow, Head, Biosecurity Program, Kirby Institute, UNSW
How do I know if my mask actually works? What about the 'candle test'?

With mask wearing in public compulsory in Victoria and recommended in New South Wales, many Australians are buying, wearing or making face masks for the first time.

Reports of counterfeit or potentially substandard masks on the market may lead some people to question whether their surgical or cloth mask actually works.

So what can you look out for when buying a mask to make sure it does what it’s supposed to do?

And how can you test one you’ve bought or made?

What do I look for in a surgical mask?

Surgical masks (also known as medical masks) are usually made of three or four layers, most commonly polypropylene.

Ideally, they should meet Australian standards for how well they filter and how resistant they are to water.

Only masks the Therapeutic Goods Administration (TGA) approves as medical products (officially known as medical devices) can be used in hospitals.

If a mask meets Australian standards as a medical device, you will see a label on the packaging, plus a code indicating the standards it has met, such as:

If your surgical mask says “not for medical use”, it doesn’t necessarily mean it’s useless. It just means it has not been submitted to the TGA for approval as a medical device.

If that’s the case, you can assess it using one of the methods below.

What do I look for in a cloth mask?

Cloth masks are non-medical devices. But they can be designed to be reasonably protective.

If you’re buying one online or making one yourself, check how many layers it has. A single-layered mask is better than no covering, but two layers are better than one, and three layers are better than two. More than three layers are better still.

Look for a fine weave, high thread count and dense material. Flimsy or see-through material, or material with large gaps, is not adequate because droplets and aerosols can pass through the gaps.

Read more: Which mask works best? We filmed people coughing and sneezing to find out

For a cloth mask, pure cotton is not a good choice for the outer layer, as it is absorbent. If someone else is coughing and sneezing near you, you want your mask to block those droplets rather than enable them to pass through the mask and infect you. A polyester or cotton-polyester blend is a better choice for this outer layer.

So for cloth masks, aim for at least three layers, including a water-resistant outer layer. The inner layer can be cotton, as that makes it more comfortable to wear, because it will absorb moisture from your breathing.

Check also that your mask fits well around your face. If you have gaps around the edges of your mask, you can breathe in unfiltered, contaminated air.

Look to see if there’s a nose bridge piece or other adjustable edge to help mould the mask around your nose and the top of your cheeks. If your mask is loose-fitting, a nylon stocking over the top can improve the fit and seal.

And remember to wash your cloth mask daily.

Read more: 13 insider tips on how to wear a mask without your glasses fogging up, getting short of breath or your ears hurting

How can I test my mask at home?

Test for good filtration and fit

For filtration and fit, you can do some rather time-consuming experiments at home.

But a much simpler method is the candle test, popularised by US science educator Bill Nye. If you can blow out a candle while wearing your mask, that’s a fail.

It means your mask doesn’t adequately stop the flow of air. If you can blow air out, air can also leak inward just as easily.

Put on your mask, light a candle, then try to blow out the flame.

Test for water resistance

The virus is carried on water droplets expelled when infected people talk, cough and sneeze. If these droplets land on your mask, you want the outer layer to repel them.

A TGA-approved mask will be water resistant. But not all other masks are. So you can test a non-approved surgical mask or cloth mask at home.

If a drop of water on the outside surface is absorbed straight away, that’s a fail. If the drop forms a bead, the mask is water-resistant.

Read more: How should I clean my cloth mask?

Whether you go for a surgical mask that’s an approved medical device, an unapproved surgical mask, or a cloth mask, these simple tips should help you assess it before leaving the house.

Masks are a simple method for helping reduce transmission of the virus that causes COVID-19, alongside physical distancing, hand-washing and other infection control measures. If enough people wear them, they may even help avoid a lockdown.

Authors: C Raina MacIntyre, Professor of Global Biosecurity, NHMRC Principal Research Fellow, Head, Biosecurity Program, Kirby Institute, UNSW

Read more https://theconversation.com/how-do-i-know-if-my-mask-actually-works-what-about-the-candle-test-144124

Business News

Choosing the Right Mini Digger: Factors to Consider

In the vast landscape of construction and landscaping projects across Australia, mini diggers have become indispensable tools. These compact machines pack a powerful punch, offering versatility and ...

Daily Bulletin - avatar Daily Bulletin

Effective Strategies to Generate and Nurture Sales Leads for Business Growth

Boost your business's growth. Discover effective strategies to generate and nurture sales leads! A sales lead refers to an individual or business entity that is potentially interested in purchasing...

Daily Bulletin - avatar Daily Bulletin

Products Made from Petroleum

From transportation to healthcare, petroleum has become an integral part of our everyday lives. This fossil fuel serves as the foundation for a wide range of products that surround us, offering conv...

Daily Bulletin - avatar Daily Bulletin

Tomorrow Business Growth